Model Number: OP-300T-Optostar-a-#1446 Brand Name: OPTOSTAR Key Specifications/Special Features: Features:Core to core alignment by PAS technologyPAS: profile alignment systemFiber core can be display clearly

Single X or Y view and X or Y view simultaneously

Auto check quality of cleaved end face

9 seconds splice time and 30 seconds heat time

Small bulk and lightweight

5.7-inch TFT color LCD monitor with clear digital image display

USB and VGA interface

Software upgrade via USB interface

Specifications:

• Applicable fibers: SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653) and NZDS (ITU-T G.655)
• Fiber count: single
• Cladding diameters: 80 to 150m
• Coating diameters: 100 to 1000m
• Fiber cleaved length:
  • 8 to 16mm with coating diameter of 250m or less
  • 16mm with coating diameter of 250 to 1000m
  • Optional set-plate for 8 to 16mm with coating diameter of 250 to 1000m is available
• Actual average splice loss:
  • 0.02dB with SM, 0.01dB with mm
  • 0.04dB with DS and 0.04dB with NZDS
  • Measured by cut-back method relevant to ITU-T and IEC standards
• Splicing time: typical 9 seconds
• Return loss: >60dB
• Splicing mode: 53 (template), 40 (user)
• Splice loss estimate: available
• Storage of splice result: last 4000 results to be stored in Internal memory
• Fiber view and magnification:
  • 300X magnification for single X or Y view, 150X magnification for X and Y view simultaneously, display direction can be changed
• Viewing method and display:
  • Two CMOS cameras and 5.7-inch color LCD monitor
  • Fiber core can be displayed clearly
• Operating conditions:
  • 0 to 5000m above sea level
  • 0 to 95% RH and -10-50°C, respectively
• Tension test: 2N
• Electrode life: 2500
• Tube heating modes: 9 (template) and 24 (user)
• Tube heating time: typical 30 seconds
• Applicable protection sleeve length: 60 and 40mm, series of micro sleeves
• No of splice/heating with battery: typical 150 cycles (splice/tube heat) with inner Li-battery
• Power supply: 100-240V AC with AC adapter, inner Li-battery (8000mAh)
• Terminals: USB 1.1 connector for PC communication, VGA connector for outer display
• Wind protection: maximum wind velocity of 15m/second
• Dimensions: (L) 150 x (W) 150 x (H) 150mm
• Weight: 2.7kg excluding battery and 3.2kg including battery